# SOC 2 Type I vs Type II: Which Report Should You Get First? > SOC 2 Type I vs Type II explained — what each report tests, the observation period, cost drivers, and which to get first. A CPA firm's decision guide with comparison tables. - Canonical: https://auditsuisse.com/soc-2-type-1-vs-type-2 - Language: en - Author: Sébastien Ruosch, CPA — Director of Audits - Published: 2026-02-22 - Updated: 2026-10-18 SOC 2 A CPA firm's plain-English comparison of SOC 2 Type I and Type II — what each tests, how long it takes, what it costs, and how to decide which one to pursue first. The short answer A SOC 2 Type I report addresses the system description and the suitability of control design at a specified date. A Type II report also addresses the operating effectiveness of controls throughout a specified period. The appropriate report type and period depend on the purpose of the report, available evidence, and recipient requirements. Choose the report type and sequence with the auditor and intended recipients. A readiness assessment is optional and does not provide an auditor’s opinion. Type I is not a prerequisite for Type II; the evidence must support the agreed examination date or period. ## Key takeaways - **Type I = design at a point in time; Type II = design plus operating effectiveness over a period.** The controls tested are the same Trust Services Criteria — only the test method and time frame change. - Choose the report type and sequence with the auditor and intended recipients. A readiness assessment is optional and does not provide an auditor’s opinion. Type I is not a prerequisite for Type II; the evidence must support the agreed examination date or period. - **Enterprise buyers almost always want a Type II.** A Type I is generally accepted only as an interim signal on the path to Type II. - Acceptable report age and any bridge-letter interval are set by the recipient's requirements and risk assessment; a bridge letter does not add auditor-tested coverage. ## SOC 2 Type I vs Type II at a glance Both reports are issued by a licensed CPA firm under the AICPA’s attestation standards (SSAE 18, with the examination performed under AT-C section 205) and evaluate the same [controls mapped to each Trust Services Criterion](https://auditsuisse.com/soc-2-controls-list-by-trust-services-criteria). What actually differs between Type I and Type II is summarized below. SOC 2 Type I vs Type II — side-by-side comparison | Dimension | SOC 2 Type I | SOC 2 Type II | | --- | --- | --- | | What it evaluates | Design and implementation of controls | Design *and* operating effectiveness of controls | | Time frame | A single point in time (an “as of” date) | A period of time (the observation period, typically 3–12 months) | | Auditor method | Inspection and walkthrough of control design | Tests of operating effectiveness, usually via sampling across the period | | Typical total timeline | Preparation, examination, and report review | Preparation, the agreed observation period, examination, and report review | | Relative cost | Lower — single-date examination | Higher — period testing and more evidence | | Buyer acceptance | Confirm suitability with the intended recipient. | Confirm suitability with the intended recipient. | | How often issued | Once, or as a first step | Annually (rolling observation periods) | The rest of this guide explains each report, the six differences that actually affect your decision, and a simple framework for choosing which to pursue first. For the end-to-end schedule, see our [full SOC 2 audit timeline](https://auditsuisse.com/soc-2-audit-timeline-what-to-expect). ## What is a SOC 2 Type I report? A SOC 2 Type I report is an attestation, by an independent CPA firm, that your controls are **suitably designed** to meet the applicable Trust Services Criteria **as of a specific date**. The auditor inspects your policies, configurations, and control descriptions and performs walkthroughs to confirm that, on that date, the controls exist and are designed to achieve their objective. It does not test whether the controls actually worked, consistently, over time. Because there is no observation period, a Type I is the faster of the two reports to obtain once your controls are in place. That makes it useful in three situations: a specific enterprise deal is stalled on a security review this quarter; your controls are too new to have a testable history yet; or your board or investors want an external signal that a compliance program is real. In each case, the Type I demonstrates that the foundation is sound while the longer Type II clock runs in the background. One common point of confusion: a Type I is *not* the same as a readiness assessment. A [readiness (or gap) assessment](https://auditsuisse.com/soc-2-readiness-checklist-2026) is an internal, non-attested exercise that surfaces design gaps before an audit; it produces no auditor’s opinion. A Type I is a formal report, with an independent opinion, that a buyer can request and rely on. ## What is a SOC 2 Type II report? A SOC 2 Type II report attests to both the **design** and the **operating effectiveness** of your controls across a defined **observation period**. Rather than confirming that a control exists on one date, the auditor samples evidence throughout the window — for example, pulling a selection of the access reviews, change tickets, or vulnerability scans that occurred during the period — and evaluates whether each control operated consistently as designed. This is why buyers weight it far more heavily than a Type I: it is evidence that your program actually functions in production, not just on paper. A SOC 2 report (Type I or Type II) is made up of the same core sections: (1) the independent service auditor’s report and opinion; (2) management’s written assertion; (3) the description of the system; and (4) the applicable Trust Services Criteria and related controls. A Type II adds a fifth element that a Type I never contains — (5) the auditor’s **tests of controls and the results** of those tests over the period. That test-results section is the heart of a Type II’s value. > “I always advise first-time clients to think of Type I as your proof of concept and Type II as your production deployment. Type I gets you in the door with buyers, but Type II is what keeps them confident year after year.” > > — Sébastien Ruosch, CPA, Director of Audits at Auditsuisse ## The differences that actually matter Six practical differences drive the Type I vs Type II decision: scope of testing, time frame, auditor method, timeline, cost, and buyer acceptance. Scope, method, and buyer acceptance are covered above; the three that most often change the plan — timeline, cost, and the observation period — are detailed here. ### How long each takes The single biggest scheduling mistake is quoting only fieldwork duration. What matters for a buyer commitment is *total elapsed time*, which for a Type II is dominated by the observation period. Typical elapsed time by phase (varies with scope and readiness) | Phase | SOC 2 Type I | SOC 2 Type II | | --- | --- | --- | | Readiness & remediation | Depends on existing controls and required remediation. | Depends on existing controls and required remediation. | | Observation / audit window | Specified examination date | Agreed reporting period | | Fieldwork | Confirmed at scoping | Confirmed at scoping | | Report drafting & delivery | Depends on report review and completion of required engagement procedures. | Depends on report review and completion of required engagement procedures. | | Total elapsed | Preparation, examination, and report review | Preparation, the agreed observation period, examination, and report review | ### How much each costs — and what drives the price Report type is only one input to cost; scope is the real driver. A Type II costs more than a Type I for the same company because the auditor tests controls repeatedly across the period rather than once. The factors below move the price of both. What drives SOC 2 audit cost | Cost factor | Effect on Type I | Effect on Type II | | --- | --- | --- | | Trust Services Criteria selected beyond Security | Moderate increase | Larger increase | | Number of in-scope systems / cloud environments | Increase | Larger increase | | Headcount & process complexity | Increase | Increase | | Current readiness / evidence maturity | Lower cost if mature | Lower cost if mature | | Length of the observation period | Not applicable | Longer period → more sampling → higher cost | | Compliance automation platform in place | Modest reduction | Larger reduction | Published market ranges vary widely and are not a substitute for a quote; the way to control cost is to [scope your systems correctly](https://auditsuisse.com/how-to-scope-systems-for-soc-2) and go into fieldwork with mature evidence. Auditsuisse quotes a single fixed fee after a short scoping call, so there are no surprises mid-engagement. ### The observation period, explained Choose the reporting period with the auditor and intended recipients. Assess the control evidence available across that period, the frequency of relevant controls, and the buyer's requirements. A three-month, six-month, or twelve-month period should never be presented as automatically acceptable to every recipient. ## Which should you get first? A decision guide The right sequence depends on how mature your controls are and how much time you have. Use the situations below to place yourself. Choosing your first SOC 2 report | Your situation | Best first report | Why | | --- | --- | --- | | A named enterprise deal is blocked this quarter | Type I, then Type II | Fastest credible signal; many buyers accept a Type I to proceed while the Type II runs. | | Limited operating history or incomplete evidence | Discuss Type I or a later Type II period | Confirm whether the available evidence supports the proposed Type II period and meets recipient requirements. | | Investors or the board want a signal quickly | Type I | A point-in-time attestation is achievable in weeks once controls are designed. | | Controls are already mature and evidenced for 3+ months | Go straight to Type II | You can skip Type I and start the observation clock immediately. | | The buyer’s contract explicitly requires “Type II” | Type II (Type I optional) | Only a Type II satisfies the requirement; a Type I won’t close it. | | You expect continuous enterprise diligence | Type II on an annual cadence | Sustained trust requires proof that controls operate over time, every year. | ### The standard progression — and won’t I pay twice? Choose the report type and sequence with the auditor and intended recipients. A readiness assessment is optional and does not provide an auditor’s opinion. Type I is not a prerequisite for Type II; the evidence must support the agreed examination date or period. ## After your report: renewals and bridge letters A SOC 2 report describes a specified date or reporting period; it is not a certificate with a universal expiry date. Customers decide how recent a report must be for their assessment. Check the period end, subsequent changes, and customer requirements when planning the next examination. Plan the next examination around your customers' requirements and the period covered by the current report. Consecutive reporting periods can reduce gaps in the history available to customers. A management bridge letter may describe developments after a report's period end, but it does not extend the auditor's opinion. Agree any acceptable interval directly with the intended recipient. ## SOC 2 vs SOC 1 vs SOC 3 SOC 2 is one of three “SOC for Service Organizations” reports. They are frequently confused, but they answer different questions and reach different audiences. SOC 1 vs SOC 2 vs SOC 3 | Report | What it covers | Primary reader | Distribution | | --- | --- | --- | --- | | [SOC 1](https://auditsuisse.com/soc-1) | Controls relevant to a client’s internal control over financial reporting (ICFR); performed under AT-C section 320 | User auditors, finance teams | Restricted use | | SOC 2 | Security, Availability, Processing Integrity, Confidentiality, Privacy (Trust Services Criteria); performed under AT-C section 205 | Security & procurement teams | Restricted use | | [SOC 3](https://auditsuisse.com/soc-3) | The same criteria as SOC 2, summarized without the detailed test results | General public, prospects | General use (publishable) | Note that AT-C section 320 governs SOC 1, not SOC 2 — a distinction worth getting right in buyer conversations. For international buyers, the closest equivalent is [ISAE 3402, the international standard](https://auditsuisse.com/isae-3402) for assurance on service-organization controls. If you are unsure which report your buyers actually need, start with [SOC 1 vs SOC 2 for B2B software vendors](https://auditsuisse.com/soc-1-vs-soc-2-for-b2b-software-vendors). ## Frequently asked questions ### What is the difference between SOC 2 Type 1 and Type 2? A SOC 2 Type I report tests whether your controls are designed appropriately at a single point in time. A SOC 2 Type II report tests whether those same controls also operated effectively over a period of time, usually three to twelve months. Both are examined by a licensed CPA firm against the AICPA Trust Services Criteria. ### Should I get SOC 2 Type 1 or Type 2 first? Choose the report type and sequence with the auditor and intended recipients. A readiness assessment is optional and does not provide an auditor’s opinion. Type I is not a prerequisite for Type II; the evidence must support the agreed examination date or period. ### How long is the SOC 2 Type 2 observation period? The reporting period is agreed for the engagement and must support the purpose of the examination and the needs of intended users. Discuss the proposed period with the auditor and key report recipients before committing. A shorter period can provide less history for recipients to evaluate; no particular duration guarantees buyer acceptance. ### How much does a SOC 2 Type 1 vs Type 2 audit cost? Cost is driven by scope, not report type alone: the number of Trust Services Criteria beyond Security, the count of in-scope systems, headcount, evidence maturity, and — for Type II — the length of the observation period. A Type II costs more than a Type I because it tests controls over time. Auditsuisse quotes a fixed fee after a short scoping call. ### Can you skip SOC 2 Type 1 and go straight to Type 2? Choose the report type and sequence with the auditor and intended recipients. A readiness assessment is optional and does not provide an auditor’s opinion. Type I is not a prerequisite for Type II; the evidence must support the agreed examination date or period. ### Is a SOC 2 Type 1 report enough for enterprise customers? Usually not on its own. Most enterprise and regulated-industry buyers require a Type II because it proves controls operated effectively over time. A Type I is typically accepted only as an interim signal to unblock a deal while your Type II observation period is underway. ### What is a SOC 2 bridge letter? A bridge letter is a management representation about the interval after a SOC report's period end. It describes relevant changes, or management's representation that no material changes occurred. It does not extend the auditor's opinion, provide a new examination, or replace a report. Recipients determine whether they can rely on it and may impose their own time limits. ## Sources & further reading 1. AICPA & CIMA — [SOC 2® — SOC for Service Organizations: Trust Services Criteria](https://www.aicpa-cima.com/topic/audit-assurance/audit-and-assurance-greater-than-soc-2). 2. AICPA & CIMA — [2017 Trust Services Criteria (with Revised Points of Focus — 2022), TSP section 100](https://www.aicpa-cima.com/resources/download/2017-trust-services-criteria-with-revised-points-of-focus-2022). 3. AICPA — Statement on Standards for Attestation Engagements No. 18 (SSAE 18); SOC 2 examinations are performed under AT-C section 205, and SOC 1 under AT-C section 320. Continue Reading ## Related Resources [### SOC 2 Readiness Checklist (2026) A complete playbook for getting your organization SOC 2 ready. Read More →](https://auditsuisse.com/soc-2-readiness-checklist-2026) [### Common SOC 2 Findings and How to Fix Them The most frequent audit findings and practical steps to remediate them. Read More →](https://auditsuisse.com/soc-2-common-findings-and-how-to-fix-them) [### SOC 2 Audit Timeline: What to Expect A realistic timeline for SOC 2 readiness, fieldwork, and report delivery. Read More →](https://auditsuisse.com/soc-2-audit-timeline-what-to-expect) --- Source: https://auditsuisse.com/soc-2-type-1-vs-type-2 · This Markdown edition is generated from the same content as the HTML page.